首页 > Support > Installation Instruc...
Installation Instructions
Supports multiple power supply methods

1. Power supply by an adapter
Forklift operation safety considered, it is recommended to get electricity directly from the battery. Because all the power supply for a forklift is from direct current of its own battery. If the power supply is taken from other sourcs, the forklift operation may be hampered, which engenders unstable factors.
Forklifts can only use DC-DC power adapter, which should be selected according to the voltage of forklift.

Darveen provides multiple types of DC power adapters:
● 12V, 24V storage battery forklift: PWR836D512 or PWR836D512BT (suitable for 8V-36V voltage input).
● 48V storage battery forklift: PWR3672D512 or PWR3672D512BT (suitable for 36V-72V voltage input)
During the installation, use cable ties to bind it onto the iron plate of the fixed bracket, or use screws to fix the cleat. Both of the two installation methods can be used.

Power adapter installation diagram



2. Direct power supply
● First, measure the output voltage of the ground flow vehicle battery, then choose the voltage regulator adapter.
● All ground flow vehicles use DC power supply. The voltage and current are assigned to each power line that needs power supply, and the current of each power line is different. Therefore, when connecting the power supply, it is better to connect the main power line, to avoid the problem that the voltage can be detected but the equipment still cannot be powered on, or other problems.
● The power line protected by flame-retardant casing can avoid safety problems caused by power line aging later.
● By safety fuse installed at the connection of power lines, the damage to voltage adapter due to abnormal voltage can be prevented.